Foam Actuator AP3 s suitable for male aerosol valves. This actuator is intended for products forming foam during application.
The system dispenses a product in the upside down position.
It is made of polypropylene.
AP3 is suitable with caps:
cap 35.1.7
cap 35.1.9
Let´s meet new member of our product portfolio. Applicator AP 15 with diameter 45 can be used mainly for cosmetics and personal care. Cap is available in glossy option and
Oil Spray Actuator AOL1 is suitable for use with BOV valve with the stem diameter of 4 mm. Actuator covers the valve. Suitable with caps: cap 35.1.13 cap 35.1.10
Non-Swirling Aerosol Button CAR 10 is suitable for male aerosol valves with stem diameter of 4 mm. This button is suitable for dispensing filling into specific and hard to accessible
Spray Actuator VV3 is suitible for male aerosol valves with stem diameter of 4 mm. When used for the first time, a plastic safety piece has to be overcome. Actuator
Male Aerosol Powder Valve – AV06 has mounting cup Bombe with diameter of 25.4 mm – AL. For powder filling.
Male Aerosol Metering Valve – AV10 has mounting cup Bombe with diameter of 25,4 mm – Fe tin plated 5.0/m2, both sides colorless varnished. Metering dispensing. One dose of dispensing
Male Aerosol Special Valve – AV04 has mounting cup with diameter of 20 mm – Al. Continuous dispensing.
Male Aerosol Valve ‘Bag-On-Valve’ – AV07 has mounting cup with diameter of 25.4 mm – AL, Fe. Suitable for dispensing in any position. With BOV, the propellant is separated from
Gel Actuator AP8 is suitible for male aerosol valves with stem diameter of 4 mm. This actuator is intended for products forming gel during application. The system dispenses a product
Male Aerosol Special Valve – AV08, with second name Ball Valve, has mounting cup from Al, Fe. Dispensing in all position.
Non-Swirling Spray Actuator VN3 is suitable for male aerosol valves with stem diameter of 4 mm. When used for the first time, a plastic safety piece has to be overcome.
Gel & Foam Actuator AP10 is suitible for male aerosol valves with stem diameter of 4 mm. This actuator is intended for products forming gel/foam during application. The system dispenses
Gel & Foam Actuator AP15 is suitable for male aerosol valves with stem diameter of 4.00 mm. This actuator is suitable for 3 pieces steel can with diameter of 45.00
Semi-Swirling Aerosol Button VP4.1 is suitable for female aerosol valves. This body of the aerosol button is a part of the large sprayer having a low, medium or high dispensing
Spray Actuator AU1 is used with the male aerosol valves having a stem with diameter of 3.40 / 4.00 mm.
Special Non-Swirling Aerosol Button VS1 is suitable for female aerosol valves. This body of the aerosol button is a part of the large special sprayer having a medium or high
Foam Actuator AP4 is suitable for female aerosol valves. This actuator is intended for products forming foam during application. It is made of polypropylene. Width of the groove: 0.70 mm
Non-Swirling Aerosol Button VS2 is suitable for female aerosol valves. This body of the aerosol button is a part of the large special sprayer with a high dispensing volume. Combined
This is Aerosol Button VP6 for female valve with the special blind mark on top. This body of the aerosol button is a part of the large two-part semi-swirling sprayer
Spray Actuator Spraycap 52.3 is a one-part actuator used with a three-part aerosol container having a 52 mm outer diameter, necked in, fitted with a diameter 25.4 mm aerosol male
